 |
|
Complete Detailing With Liqui-Tech Synthetic Products Group
Wet entire vehicle before washing. Pour approximately 2 capfuls of FINISH FIRST WASH & CONDITIONER into wash pail. Fill pail with water to activate suds. Use soft cloth or wash mitt to apply suds beginning on top surfaces and working down. Wash vehicle and rinse in 4-ft. sections at a time. FINISH FIRST WASH & CONDITIONER does not streak or smear like ordinary organic soaps, but smaller washed areas are generally rinsed better for maximum cleaning. Use separate cloth or mitt when cleaning wheel and wheel well areas. Completely dry vehicle with chamois or lint free soft towels.
Use FINISH PREP Precleaner to remove organic wax or glaze residue, bugs and tar, surface contaminants, or if applicable, stains and oxidation. Apply Finish Prep to applicator pad or soft cloth. Four half-dollar-sized drops will clean an approximately 2-sq. ft. area. Massage FINISH PREP into this 2-ft. area using light pressure only. FINISH PREP cleans by fluid emulsification, therefore hard rubbing or pressure is not needed. Remove with soft cloth while still wet to achieve maximum cleaning performance. Repeat over entire painted surface. *Note – never apply FINISH PREP to a hot surface to avoid uneven, premature drying of emulsifiers.
Place 4 dime-sized drops of FINISH FIRST POLISH on clean cloth or applicator pad. Wipe onto an approximately 2-sq. ft. area using back and forth motion. Apply to entire vehicle’s painted surface at one time. A thin, even application of FINISH FIRST works best. Using thick coats is wasteful and will cause excess dust upon removal. Allow FINISH FIRST to "cure" a minimum of 1 hour to overnight before removing. This important step allows for maximum durability as will as filling of fine scratches and swirl marks. During the curing phase, there is no such thing as "too long", but we recommend a minimum of 1 hour. While FINISH FIRST is curing, use this time to clean interior, tires, windows and other areas to complete the detailing process.
For vinyl/leather surfaces that are heavily soiled or have oily residue from silicone based or organic surface products, use Liqui-Tech’s #421 MPC. This multi-purpose cleaner can be used on vinyl/leather, cloth upholstery, convertible tops, and carpets. #421 MPC deep cleans without leaving a residue that will actually attract dirt, thus leaving these areas cleaner longer. On clean vinyl/leather surfaces, use LIQUI-TECH PROTECTANT W/Lanolin to enhance and protect these areas from dirt, dust, UV rays, and contaminants. LT PROTECTANT contains no silicone and will leave these surfaces clean and oil free, but with maximum protection and enhancement.
For interior and exterior window cleaning and enhancement, use Liqui-Tech WINDOW FINISH. This ammonia-free formula cleans without streaks and smears associated with ordinary glass cleaners. Mist onto small area and wipe with soft cloth or paper towel, turning towel over with each wipe. When WINDOW FINISH dries, apply a quick buff to bring up sparkle and slickness to glass.
Make sure tires and wheels are cool to the touch! Wet tire and wheel, then spray on #421 MPC. Scrub tires with soft bristled brush to remove dirt and brown, oily buildup usually found on tires. Take soft cloth and wipe wheel. Rinse tire and wheel and dry thoroughly. If spots, stains or cloudiness is present on wheels, apply Liqui-Tech METAL FINISH Polishing Crème. This non-abrasive, enzymatic cleaner removes contaminants and dullness without scratching. Once wheel surface is clean, apply Liqui-Tech CUSTOM WHEEL/METAL PROTECTOR to create a durable, glossy shield that protects against future buildup of damaging contaminants. For protection and enhancement of tires, use Liqui-Tech PROTECTANT W/Lanolin. This non-silicone formula produces luster and protection without being oily to the touch.
After the minimum 1 hr. has passed, remove FINISH FIRST with soft cotton cloth. Simply wipe off haze to reveal a dazzling shine and unsurpassed paint protection. Additional gloss and protection can be achieved by adding multiple properly cured coats of FINISH FIRST Polish/Finish.
FINISH FAST is excellent for paint or chrome to remove dust, bugs and fingerprints. FINISH FAST will enhance gloss and shine to give a "just polished" look. This non-silicone formula can be used in direct sunlight without fear of streaks or smears.
These steps and techniques will give your vehicle the superior appearance that only Liqui-Tech products can provide. For more information call us toll-free at 1-800-900-4089.
Put Your Vehicle’s FINISH FIRST With Liqui-Tech World Class Appearance Products
